Brake Hose Assembly AN3
Our brake hose assembly AN3 is constructed with a PTFE inner liner, a stainless steel outer braid, and a durable PVC cover, ensuring excellent strength, flexibility, and resistance to wear and tear.
- Inner tube: high quality PTFE/PA
- Reinforcement: Stainless steel/yarn braid
- Cover: colorful and transparent PU
- Modification of the Brake Hose Assembly, the joint can be customized according to the sample or the drawing
- Application:PA AN3 brake line is mostly used to refit electrical mobile, mountain bike and motorcycle. While PTFE AN3 brake line assembly is mostly used to refit high-end car. It’s an necessary part of race car. Besides, it can be widely used in gas transfer, chemical pipeline, high temperature and pressure industry and electronic machine.
Differences between PTFE and PA AN3 Brake Hose Assembly
The temperature range of PA brake hose is -40℃-120℃, while it’s -60℃-260℃ of PTFE brake hose
PTFE brake hose assembly has better bend radius and flexibility
PTFE is flame retardant, but PA can be ignited
PTFE brake hose is originally used on the airplane as the hydraulic part. Because of the great low expansion property at high temperature, it provides excellent hydraulic transmission effect. Then, the hydraulic force from general brake pump can entirely force the branches to provides stable brake force. Besides, the metal layer is hard to break, which greatly reduces the brake failure caused by leakage or damage. Thus PTFE brake hose provides you the security guarantee.
AN3 brake hose Characteristics
- Improved braking performance: The high-quality materials used in the assembly improve the flow and pressure of the brake fluid, resulting in better braking ability and faster response times.
- Increased durability: Constructed of high quality materials that make it resistant to wear and tear. It can withstand extreme temperatures, pressure and vibration, ensuring a longer life for your braking system.
- Versatility: Available in different lengths, angles and joints, making it adaptable to a variety of brake configurations and vehicle types. This flexibility makes it easy to find the right brake hose assembly for your vehicle.
- Compliance with safety standards: Meets SAE J1401 safety and performance standards. It is also compatible with DOT-approved brake fluids, ensuring your braking system is safe and compliant.
- Durability: Durable, even in harsh environments. The stainless steel braided hoses and aluminum fittings are corrosion resistant and can withstand salt, water and other harsh environments.
Installation Instructions for Brake Hose Assembly AN3
Before installing the Air Brake Hose Assembly AN3, please read these instructions carefully and follow the steps in order to ensure a safe and proper installation.
1.Remove the old brake hose assembly: Use a wrench to loosen the fittings at each end of the old brake hose assembly. Once the fittings are loose, carefully remove the old hose assembly.
2.Install the new brake hose assembly: Install the new brake hose assembly by threading the fittings at each end onto the appropriate brake line or caliper. Be sure to tighten the fittings securely, but do not overtighten.
3.Bleed the brake system: After installing the new brake hose assembly, it is important to bleed the brake system to remove any air that may have entered during the installation process. To do this, fill the brake fluid reservoir to the proper level, then open the bleeder valve on the caliper or brake line. Have a helper press the brake pedal several times, then close the bleeder valve. Repeat this process until all air is removed from the system.
4.Check for leaks: Once the brake system has been bled, check for leaks at all fittings and connections. If there are any leaks, tighten the fittings or replace any damaged components.
5.Test drive: Take your vehicle for a test drive to ensure that the brakes are working properly and there are no issues with the new brake hose assembly.
AN3 brake hose Fittings and Assemblies
Why OrientFlex is your Unique Manufacturer and Supplier
- Superior Quality: Our brake hose assemblies AN3 are made from premium materials, including stainless steel braided hoses and aluminum fittings. This ensures that the assembly is durable, corrosion resistant, and can withstand high pressure braking applications.
- Customizable options: We offer a wide range of customizable options, including different lengths, angles and fittings to meet your specific needs.
- Cost-effective: Our brake hose assembly AN3 is competitively priced, making it a cost-effective solution for those who want a high-quality brake assembly without spending a fortune.
- Customer Service: We are committed to providing exceptional customer service and support.
Silicone radiator hoses are automotive cooling system components made of silicone material used to replace traditional rubber radiator hoses. Benefits of Silicone Radiator Hose, It is a high temperature tolerant, flexible and weather resistant material and is...
You May Also Like
More hose choices for your cars
There are many options about size, color and type. We also accept your customization
on unique shapes for different vehicles or usages