Select Page

Orientflex can produce kinds of oil cooler hoses SAE J1532. but, do you know the type details? So, today i’d like to share you different types.

First, SS oil cooler hose

SS oil cooler hose

Structure: inner CPE/NBR rubber+ SS reinforce+ SS fully braided outer layer.

Second, Nylon oil cooler hose

Nylon oil cooler hose

Structure: inner CPE/NBR rubber+ ss reinforce+ nylon fully braided outer layer.

Above two types, its inner hoses can resist oil, gasoline. Also, it can use in cooling system water pipes, vacuum pipes.

Temperature: -40 +120℃.

Length 20m-100m.

Size: AN4-AN20 US Standard.

Uses: For modified cars. CPE can resist to aromatic hydrocarbons than NBR. So, it is more resistant to racing oils.

Pressure 300-1500psi

Third, SS PTFE oil cooler hose

SS PTFE oil cooler hose

Inner tube PTFE + SS fully braided outer layer

Last, Nylon PTFE oil cooler hose

Nylon PTFE oil cooler hose

Inner tube PTFE + ss reinforce+ nylon fully braided outer layer.

Above two types, PTFE has better pressure resist, aging resist,etc than NBR/CPE inner tube.

Temperature: +60 +260℃

Length 20-100 meters

Size: AN4-AN12 US Standard

Pressure 1000-4000psi

Use: For modify racing fuel, ethanol fuel, etc. Moreover, it can use for modified cars, oil cooling systems of racing cars, etc.

Up to now, i think you’ve known very well on the oil cooler hoses. Therefore, If you have needs,please feel free to send us inquiry, we will give you best prices.