Vacuum hose is an important part of a vacuum system, used to connect vacuum pumps, vacuum vessels and other equipment. The diameter of the vacuum tube is one of its important parameters, which directly affects the performance of the vacuum system. Therefore, it is very important to measure the diameter of vacuum hose correctly.
5 Methods of measure vacuum hose diameter
According to the material and shape of the vacuum tube, different methods can be used to measure the vacuum tube diameter.
Measurement with a diameter meter
A diameter meter is a tool specifically designed to measure the diameter of round objects. Measuring the diameter of a vacuum tube with a diameter meter is very simple, just place the probe of the diameter meter on the surface of the tube and read the reading on the probe.
Measurement with a tape measure
A tape measure is a common measuring tool that can also be used to measure vacuum tube diameter. To measure the diameter of a vacuum tube with a tape measure, the tube is placed on a flat surface and the circumference of the tube is measured with the tape measure. Divide the circumference by π to get the diameter of the vacuum tube.
Measurement with vernier calipers
Vernier calipers are a precision measuring tool that can be used to measure the length, width, thickness and diameter of various objects. To measure the diameter of a vacuum tube with a vernier caliper, you need to place the tube on the measuring surface of the vernier caliper and then rotate the vernier so that the stylus of the vernier is in contact with the surface of the vacuum tube. The reading on the vernier is the diameter of the vacuum tube.
Measurement by line
If you do not have a specialized measuring tool, you can also use a line to measure the diameter of the vacuum tube. To measure the diameter of a vacuum tube using a thread, you need to wrap the thread around the surface of the tube and then measure the length of the thread with a ruler. The length of the wire is divided by the number of wraps to get the diameter of the vacuum tube.
Measurement according to the labeling of the vacuum tube
Some vacuum tubes are labeled with diameter information on the surface. If there is a label on the surface of the vacuum tube, you can get the diameter of the vacuum tube directly according to the label.
When choosing the measurement method, the choice should be made according to the material, shape and measurement accuracy requirements of the vacuum tube. For vacuum tubes made of hoses, plastic tubes and other materials, it is recommended to use a diameter meter or vernier calipers to measure. For vacuum tubes made of metal tubes and other materials, you can use a diameter meter, vernier caliper or tape measure to measure.
The following are some precautions for measuring the diameter of vacuum tubes:
When measuring the diameter of a vacuum tube, the tube should be placed on a flat surface to ensure accurate measurements.
If measuring with a diameter gauge or vernier caliper, care should be taken that the stylus makes good contact with the surface of the vacuum tube.
If a wire is used for measurement, attention should be paid to whether the wire is even when it is wound around the surface of the vacuum tube.
Knowledge of the correct method and precautions can ensure that the measurement of vacuum tube diameter is accurate.
Conclusion
Through the introduction of this article, it is hoped that readers will be able to grasp the basic methods and precautions for measuring the diameter of vacuum hoses. When making measurements, make sure you use the proper tools and seek professional help in case of uncertainty to ensure the accuracy of the measurement. Choosing the right diameter hose is a critical step in ensuring the proper operation of a vacuum system, so be careful when purchasing and installing hoses.
#silicone vacuum hose #vacuum hose